5305-01-073-1488, SCREW,SHOULDER

National Stock Number:
5305-01-073-1488

Federal Supply Class:
5305

National Item Identification Number:
010731488

Description:
SCREW,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 IN.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below No. 10 (0.190 IN.) (5 mm) nominal diameter. No. 10 (0.190 IN.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use SCREW, EXTERNALLY RELIEVED BODY. For items with a No. 10 (0.190 IN.) (5 mm) or larger thread diameter without an inserted driver head, use BOLT, SHOULDER. Excludes BOLT, INTERNAL WRENCHING and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

MS51975-50	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS51975-50	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	3.675 INCHES MINIMUM AND 3.755 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.853 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD HEIGHT	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-21472 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
SHOULDER DIAMETER	0.621 INCHES MINIMUM AND 0.623 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH	2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM FIRST SHOULDER
SINGLE SHEAR STRENGTH	84000 POUNDS PER SQUARE INCH
SHOULDER SHAPE	ROUND FIRST SHOULDER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	13
WIDTH ACROSS FLATS	0.312 INCHES NOMINAL

Click here to Register for Free 30-day Trial