|
|
|
National Stock Number:
5305-01-101-4837
Federal Supply Class:
5305
National Item Identification Number:
011014837
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT4016-4-2 | 17446 | HUCK INTERNATIONAL, INC | | HT4016-4-2 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.507 INCHES MINIMUM AND 0.537 INCHES MAXIMUM | | GRIP LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | HEAD DIAMETER | 0.390 INCHES MINIMUM AND 0.394 INCHES MAXIMUM | | HEAD STYLE | OVAL COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.326 INCHES MINIMUM AND 0.397 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 |
|
|