|
|
|
National Stock Number:
5305-01-369-9501
Federal Supply Class:
5305
National Item Identification Number:
013699501
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FF-S-85 TYPE II STYLE 10P | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS51100-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | THREAD LENGTH | 0.359 INCHES NOMINAL | | FASTENER LENGTH | 0.404 INCHES MINIMUM AND | | 0.435 INCHES MAXIMUM | | MATERIAL | STEEL COMP 410 OR | | STEEL COMP 416 OR | | STEEL COMP 430 OVERALL | | HEAD STYLE | HEXAGON | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 2A | | MATERIAL DOCUMENT AND CLASSIFICATION | FF-S-85 FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 70000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 40000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.272 INCHES MINIMUM AND | | 0.291 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.612 INCHES MINIMUM AND | | 0.620 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.068 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND | | 10P STYLE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-S-85 TYPE II STYLE 10P | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS51100-2 |
|
|