| FASTENER LENGTH | 0.746 INCHES MINIMUM AND 0.776 INCHES MAXIMUM |
| GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.361 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| HEAD HEIGHT | 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM |
| HEAD STYLE | ROUND |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6382 ASSN STD 1ST MATERIAL RESPONSE OR AMS6415 OR 6484 ASSN STD 2ND MATERIAL RESPONSE OR AMS6327,6322 OR AMS6325 ASSN STD 3RD MATERIAL RESPONSE OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,BRAZIER HEAD,OFFSET CRUCIFORM AND DOVETAIL SLOT,180 KSI |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SPECIFICATION/STANDARD DATA | 80205-NAS2842 THRU NAS2850 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416,TY II,CL 2;IMMEDIATELY AFTER PLATING (WITHIN 1 HOUR) BAKE AT 375 DEG +/- 25 DEG FOR A MINIMUM OF 23 HOURS ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.323 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 32 |