| CRITICALITY CODE JUSTIFICATION | FEAT |
| FASTENER LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| FEATURES PROVIDED | FINISHED HEAD |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| HEAD STYLE | HEXAGON |
| HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| HOLE DIAMETER | 0.070 INCHES NOMINAL |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 601 OVERALL |
| MINIMUM TENSILE STRENGTH | 136000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.312 INCHES |
| SPECIAL FEATURES | DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES & MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO THE WEAPON SYSTEM, DEATH OR SERIOUS INJURY |
| WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL |
| THREAD CLASS | 1A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.512 INCHES MINIMUM AND 0.532 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNF |