5935-00-043-0563 CONNECTOR,PLUG,ELECTRICAL Index 5306-00-043-0567 BOLT,SHEAR

National Stock Number:
5306-00-043-0566

Federal Supply Class:
5306

National Item Identification Number:
000430566

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
AIC926-4-2006725SPS TECHNOLOGIES, LLC
BACB30EK4-20C81205THE BOEING COMPANY
BM90156-4-2017446HUCK INTERNATIONAL, INC
BM90156-4-2097928HUCK INTL INC
C878-4-2081755LOCKHEED MARTIN CORPORATION
EWSB926-4-2056876ALTA PRODUCTS CO INC
EWSB926-4-2056878SPS TECHNOLOGIES, LLC
EWSB926-4-2080539SPS TECHNOLOGIES, LLC
EWSB926-4A2056878SPS TECHNOLOGIES, LLC
EWSB926-4A2080539SPS TECHNOLOGIES, LLC
GB511A4-20A26512NORTHROP GRUMMAN SYSTEMS CORPORATION
VS2106C4S2092215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.418 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH1.543 INCHES NOMINAL
GRIP DIAMETER0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HEAD HEIGHT0.154 INCHES MINIMUM AND 0.174 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON
MATERIALSTEEL OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE
WIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.293 INCHES MINIMUM
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial