|
|
|
National Stock Number:
5306-00-045-1970
Federal Supply Class:
5306
National Item Identification Number:
000451970
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 107C2603-1 | 77272 | THE BOEING COMPANY | | 107C2603-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 7.569 INCHES MINIMUM AND 7.601 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 7.724 INCHES MINIMUM AND 7.771 INCHES MAXIMUM | | GRIP DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM | | GRIP LENGTH | 7.380 INCHES NOMINAL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.105 INCHES MINIMUM AND 0.108 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 0.562 INCHES NOMINAL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.344 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|