|
|
|
National Stock Number:
5306-00-051-6913
Federal Supply Class:
5306
National Item Identification Number:
000516913
Description:
BOLT,TEE HEAD
Detail:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER AND WITH A HEAD SPECIALLY DESIGNED TO FIT IN A SLOT AND HOLD AGAINST TURNING.
|
Manufacturer Information:
| MS9433-10 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.599 INCHES MINIMUM AND | | 0.639 INCHES MAXIMUM | | FASTENER LENGTH | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH | | HEAD STYLE | TEE NO. 6 | | HEAD HEIGHT | 0.146 INCHES MINIMUM AND | | 0.166 INCHES MAXIMUM | | HEAD LENGTH | 0.480 INCHES MINIMUM AND | | 0.500 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.185 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | CHAMFER ANGLE | 45.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | 63.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS9433-10 |
|