| CRITICALITY CODE JUSTIFICATION | FEAT |
| EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| FASTENER LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| FEATURES PROVIDED | FINISHED HEAD |
| GRIP LENGTH | 0.565 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| HEAD STYLE | DOUBLE HEXAGON W/HOLE |
| HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE |
| HOLE DIAMETER | 0.060 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| HOLE TYPE | DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 601 OVERALL |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SPECIAL FEATURES | CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TOWEAPON SYSTEM, DEATH OR SERIOUS INJURY. |
| WIDTH BETWEEN FLATS | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE FINISH | 63.0 MICROINCHES GRIP |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.740 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |