|
|
|
National Stock Number:
5306-00-069-3019
Federal Supply Class:
5306
National Item Identification Number:
000693019
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 5306000693019 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5306000693019 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5306001800238 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5306001800238 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 53060693019 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 53060693019 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | AN8C56A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| FASTENER LENGTH | 5.828 INCHES MINIMUM AND 5.875 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | GRIP LENGTH | 5.047 INCHES MINIMUM AND 5.078 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | WIDTH BETWEEN FLATS | 0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.750 INCHES MINIMUM AND 0.828 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNF |
|
|