1560-00-097-4539 STRIP,TANK ASSEMBLY Index 1560-00-097-4552 CLAMP ASSEMBLY,DUCT SUPPORT

National Stock Number:
5306-00-097-4542

Federal Supply Class:
5306

National Item Identification Number:
000974542

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS653V20D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.383 INCHES MINIMUM AND 1.433 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH1.511 INCHES MINIMUM AND 1.541 INCHES MAXIMUM
GRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HEAD HEIGHT0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONNAS 621 ALL0Y 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALTITANIUM ALLOY OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS653 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
THREAD LENGTH0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us