5306-00-097-4820 BOLT,SHEAR Index 5306-00-097-4825 BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-097-4823

Federal Supply Class:
5306

National Item Identification Number:
000974823

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS655V17D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.294 INCHES MINIMUM AND 1.344 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH1.422 INCHES MINIMUM AND 1.452 INCHES MAXIMUM
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM
HEAD HEIGHT0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALTITANIUM ALLOY UNS R56400 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS655 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SURFACE FINISH16.0 MICROINCHES THREADS
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH63.0 MICROINCHES GRIP
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us