|
|
|
National Stock Number:
5306-00-097-7350
Federal Supply Class:
5306
National Item Identification Number:
000977350
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 57449-3 | 50392 | SPS TECHNOLOGIES INC | | 57449-3 | 56878 | SPS TECHNOLOGIES, LLC | | AIC550-12-3 | 06725 | SPS TECHNOLOGIES, LLC | | GB511AC12-3 | 06725 | SPS TECHNOLOGIES, LLC | | GB511AC12-3 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB511AC12-3 | 73197 | HI-SHEAR CORPORATION | | GB511AC12-3 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.170 INCHES MINIMUM AND 3.190 INCHES MAXIMUM FIRST HOLE | | EXTENDED WASHER DIAMETER | 1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | FASTENER LENGTH | 3.485 INCHES MINIMUM AND 3.515 INCHES MAXIMUM | | GRIP DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | GRIP LENGTH | 2.310 INCHES MINIMUM AND 2.330 INCHES MAXIMUM | | HEAD HEIGHT | 0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5708 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 0.808 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.155 INCHES MINIMUM AND 1.205 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJS | | THREAD QUANTITY PER INCH | 16 |
|
|