5905-00-100-6714 RESISTOR,FIXED,WIRE WOUND Index 5930-00-100-6717 SWITCH SECTION,ROTARY

National Stock Number:
5306-00-100-6716

Federal Supply Class:
5306

National Item Identification Number:
001006716

Description:
BOLT,MACHINE

Detail:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUTS FOR THREAD RELIEF). IT IS NO. 10 (0.190 IN.) (5 MM) OR LARGER IN SIZE AND HAS A HEAD WHICH IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER OR DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. EXCLUDES BOLT, INTERNAL WRENCHING AND THUMBSCREW. SEE ALSO SCREW, EXTERNALLY RELIEVED BODY.


Manufacturer Information:
NAS568-5780205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
FASTENER LENGTH1.765 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.375 INCHES NOMINAL
HEAD STYLEHEXAGON
HOLE CONFIGURATION STYLEHEXAGON CORNERS
HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HOLE QUANTITY3
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.500 INCHES
WIDTH BETWEEN FLATS0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.705 INCHES MINIMUM AND 1.782 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH20


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us