|
|
|
National Stock Number:
5306-00-104-4680
Federal Supply Class:
5306
National Item Identification Number:
001044680
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 2-101-078-06 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | TEST | | EXTENDED WASHER DIAMETER | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | FASTENER LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | HARDNESS RATING | 79.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 83.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | HEAD HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE | | HOLE DIAMETER | 0.047 INCHES NOMINAL | | HOLE QUANTITY | 4 | | HOLE TYPE | DRILLED | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH BETWEEN FLATS | 0.212 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | TEST DATA DOCUMENT | 91547-+6808 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|