5340-00-108-9739 POST,ELECTRICAL-MECHANICAL EQUIPMENT Index 5905-00-108-9744 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5306-00-108-9741

Federal Supply Class:
5306

National Item Identification Number:
001089741

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS1116-45D04348LAWRENCE ENGINEERING AND SUPPLY INC
NAS1116-45D07851NOR-CAL SUPPLY CO
NAS1116-45D08938AIR INDUSTRIES CO INC
NAS1116-45D28977ACCURATE PRECISION FASTENER CORP.
NAS1116-45D30889ERIKS SOUTHWEST INC DBA MONTCLAIR ENTERPRISES
NAS1116-45D30902F AND C SALES INC
NAS1116-45D50068ITT RULE INDUSTRIES INC DANFORTH DIV
NAS1116-45D56878SPS TECHNOLOGIES, LLC
NAS1116-45D71563COLLINS ENGINEERING CORP
NAS1116-45D73197HI-SHEAR CORPORATION
NAS1116-45D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1116-45D80539SPS TECHNOLOGIES, LLC
NAS1116-45D82172DURHAM AIRCRAFT SERVICE INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.418 INCHES MINIMUM AND 3.468 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH3.567 INCHES MINIMUM AND 3.597 INCHES MAXIMUM
GRIP DIAMETER0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM
GRIP LENGTH2.802 INCHES MINIMUM AND 2.822 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER1.000 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS1116 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.745 INCHES MINIMUM AND 0.795 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH12


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us