|
|
|
National Stock Number:
5306-01-119-3634
Federal Supply Class:
5306
National Item Identification Number:
011193634
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| MS9724-06 | 0U583 | SAE INTERNATIONAL | | MS9724-06 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9724-06 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.438 INCHES NOMINAL | | EXTENDED WASHER THICKNESS | 0.060 INCHES MINIMUM | | FASTENER LENGTH | 0.887 INCHES NOMINAL | | GRIP LENGTH | 0.304 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | HEAD HEIGHT | 0.303 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MINIMUM YIELD STRENGTH | 115000 POUNDS PER SQUARE INCH | | MINIMUM TENSILE STRENGTH | 175000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.502 INCHES MINIMUM AND 0.583 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 | | WIDTH BETWEEN FLATS | 0.312 INCHES NOMINAL |
|
|