5306-01-133-0168, BOLT,SHEAR

National Stock Number:
5306-01-133-0168

Federal Supply Class:
5306

National Item Identification Number:
011330168

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

10115901	A486G	NIMIKKEISTOKESKUS NCB FINLAND
5306PL0894766	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS21250H05008	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
FASTENER LENGTH	1.089 INCHES MINIMUM AND 1.109 INCHES MAXIMUM
GRIP LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.338 INCHES MINIMUM AND 0.358 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.579 INCHES MINIMUM AND 0.619 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	24
WIDTH BETWEEN FLATS	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM

Click here to Register for Free 30-day Trial