5306-01-313-1767, BOLT,SHEAR

National Stock Number:
5306-01-313-1767

Federal Supply Class:
5306

National Item Identification Number:
013131767

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

MS21134H04015	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21134H04015	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH	1.393 INCHES MINIMUM AND 1.423 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-416 TY 2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.445 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial