5306-01-347-6988, BOLT,SHEAR

5910-01-347-6989 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5306-01-347-6988

Federal Supply Class:
5306

National Item Identification Number:
013476988

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

BACB30MT8T51	06710	VALLEY-TODECO, INC.
BACB30MT8T51	06725	SPS TECHNOLOGIES, LLC
BACB30MT8T51	17446	HUCK INTERNATIONAL, INC
BACB30MT8T51	17943	FEDERAL MANUFACTURING CORP
BACB30MT8T51	27624	SPS TECHNOLOGIES LLC
BACB30MT8T51	56878	SPS TECHNOLOGIES, LLC
BACB30MT8T51	81205	THE BOEING COMPANY
BACB30MT8T51	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
BACB30MT8T51	97928	HUCK INTL INC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
FASTENER LENGTH	3.986 INCHES MINIMUM AND 4.016 INCHES MAXIMUM
GRIP DIAMETER	0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH	3.178 INCHES MINIMUM AND 3.198 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.491 INCHES MINIMUM AND 0.511 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON EXTENDED WASHER
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY	2
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.813 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	20
WIDTH BETWEEN FLATS	0.588 INCHES MAXIMUM

Click here to Register for Free 30-day Trial