5306-14-400-8085, PIN,HEADED,THREADED

National Stock Number:
5306-14-400-8085

Federal Supply Class:
5306

National Item Identification Number:
144008085

Description:
PIN,HEADED,THREADED

Detail:
(ALL EXCEPT USA) A CONNECTING AND/OR ARTICULATING DEVICE HAVING A CYLINDRICAL SHANK WITH A HEAD AT ONE END AND A THREADED PORTION AT THE OTHER END. THE UNTHREADED PORTION IS OF A SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) OR LESS, OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25.4 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25.4 MM) IN DIAMETER, SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (38 MICRONS) OR LESS. THE SPECIFIC RMS NICROINCH FINISH ON THE BEARING SURFACE MUST NOT EXCEED 32 MICROINCHES (0.8 MICRON). THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) BELOW THE MINIMUM SHANK DIAMETER. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER AND/OR MAY HAVE FLATS OR SIMILAR FEATURES FOR POSITIONING OR SECURING. THE ITEM MAY BE INTERNALLY RELIEVED WITH A CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE WHICH MAY EXTEND A PART OR WHOLE OF ITS LENGTH. EXCLUDES BOLT, CLOSE TOLERANCE; BOLT, SHEAR; BOLT, SHOULDER; AND BOLT, INTERNALLY RELIEVED BODY.

Manufacturer Information:

33411BE060012LE

F6117

DASSAULT AVIATION

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	18.6 MILLIMETERS MINIMUM AND 18.8 MILLIMETERS MAXIMUM
FASTENER LENGTH	22.7 MILLIMETERS MINIMUM AND 23.3 MILLIMETERS MAXIMUM
GRIP DIAMETER	5.982 MILLIMETERS MINIMUM AND 5.990 MILLIMETERS MAXIMUM
GRIP LENGTH	11.7 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM
HEAD HEIGHT	2.25 MILLIMETERS MINIMUM AND 2.50 MILLIMETERS MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	F3025 AIR 9160C MIL STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 30NCD16
MINIMUM TENSILE STRENGTH	880 MEGAPASCALS
MINIMUM YIELD STRENGTH	740 MEGAPASCALS
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	1.778 MILLIMETERS MINIMUM AND 2.032 MILLIMETERS MAXIMUM
WIDTH BETWEEN FLATS	9.27 MILLIMETERS MINIMUM AND 9.57 MILLIMETERS MAXIMUM
SURFACE FINISH	0.8 MICROMETERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NF L 09-753 CODE LE NATIONAL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial