|
|
|
National Stock Number:
5307-00-044-1785
Federal Supply Class:
5307
National Item Identification Number:
000441785
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 441785 | 24617 | GENERAL MOTORS CORP | | 441785 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY NUT END THREAD CLASS. AND AS MODIFIED BY STUD END THREAD PITCH DIAMETER | | OVERALL LENGTH | 2.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.634 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.496 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD PITCH DIAMETERS | +0.4520 TO 0.4540 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|