|
|
|
National Stock Number:
5307-00-044-6550
Federal Supply Class:
5307
National Item Identification Number:
000446550
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 446550 | 24617 | GENERAL MOTORS CORP | | 446550 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY NUT END THREAD CLASS. AS MODIFIED BY STUD END THREAD PITCHDIAMETERS | | OVERALL LENGTH | 1.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.469 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|