|
|
|
National Stock Number:
5307-00-053-2726
Federal Supply Class:
5307
National Item Identification Number:
000532726
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| B3103999 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | B3103999NM | 80064 | NAVAL SHIP SYSTEMS COMMAND | | BS1024 | 56042 | SOUTHWEST PUMP CO | | BS1024NM | 56042 | SOUTHWEST PUMP CO |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING | | OVERALL LENGTH | 2.250 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | 0.625 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 5 STUD THREAD | | THREAD QUANTITY PER INCH | 11 NUT THREAD | | 11 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES NOMINAL NUT THREAD | | 0.875 INCHES NOMINAL STUD THREAD | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATIONAND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTEDFIELD BY A PERMEABILITY INDICATOR SPECIFIED IN MIL-I-17214 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80064 | | DESIGN CONTROL REFERENCE | B3103999 |
|
|