|
|
|
National Stock Number:
5307-00-054-3893
Federal Supply Class:
5307
National Item Identification Number:
000543893
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2112313-1 | 11243 | COSMODYNE, LLC |
|
Techincal Specification:
| OVERALL LENGTH | 10.000 INCHES MINIMUM | | MATERIAL | STEEL COMP 1018 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | SPECIAL CLEAN FOR LOX AND LN SERVICE | | SURFACE FINISH | 32.0 MICROINCHES SHANK | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.750 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 2.000 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|