|
|
|
National Stock Number:
5307-00-064-8075
Federal Supply Class:
5307
National Item Identification Number:
000648075
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 00741-2 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | GP796CX1 | 16712 | SIEMENS ENERGY, INC. |
|
Techincal Specification:
| HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 5.219 INCHES MINIMUM AND 5.281 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4142 OR STEEL COMP 4145 | | NOMINAL THREAD SIZE | 1.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 1.500 INCHES STUD THREAD | | SPECIAL FEATURES | SQUARE PROJECTION ON NUT END 1.000 IN. WIDE BY 1.000 IN. LONG | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 2.125 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 2.250 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 8 NUT THREAD | | THREAD QUANTITY PER INCH | 8 STUD THREAD | | THREAD SERIES DESIGNATOR | UN NUT THREAD | | THREAD SERIES DESIGNATOR | UN STUD THREAD |
|
|