|
|
|
National Stock Number:
5307-00-081-1875
Federal Supply Class:
5307
National Item Identification Number:
000811875
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 463053P3 | 77445 | RTX CORPORATION | | 463053P3 | 98524 | MONOGRAM AEROSPACE FASTENERS, INC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8735 OR STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.250 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.470 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD PITCH DIAMETERS | +0.1700 TO 0.1715 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|