|
|
|
National Stock Number:
5307-00-081-1877
Federal Supply Class:
5307
National Item Identification Number:
000811877
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 463053P9 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8735 OR STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.250 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.470 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD PITCH DIAMETERS | +0.1760 TO 0.1775 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|