|
|
|
National Stock Number:
5307-00-105-3298
Federal Supply Class:
5307
National Item Identification Number:
001053298
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 701192 | 64104 | DRESSER, LLC | | 701192VM | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| OVERALL LENGTH | 2.938 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATIONAND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTEDFIELD | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.775 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.5625 INCHES MINIMUM STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|