|
|
|
National Stock Number:
5307-00-111-1315
Federal Supply Class:
5307
National Item Identification Number:
001111315
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 52C468-1 | 21439 | CURTISS-WRIGHT FLOW CONTROL SERVICE, LLC |
|
Techincal Specification:
| OVERALL LENGTH | 11.938 INCHES MINIMUM AND 12.128 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY1 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.250 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 1.250 INCHES NOMINAL STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD |
|
|