|
|
|
National Stock Number:
5307-00-111-7818
Federal Supply Class:
5307
National Item Identification Number:
001117818
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 698893-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.280 INCHES MINIMUM AND 2.300 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.112 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.112 INCHES STUD THREAD | | SPECIAL FEATURES | W/HEX. SOCKET DRIVE IN STUD END | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 1.020 INCHES MINIMUM AND 1.040 INCHES MAXIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 40 NUT THREAD | | THREAD QUANTITY PER INCH | 40 STUD THREAD |
|