|
|
|
National Stock Number:
5307-00-131-8086
Federal Supply Class:
5307
National Item Identification Number:
001318086
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 1112964 | 18355 | THE BOEING COMPANY | | 1112964 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.093 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.176 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.375 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.468 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD QUANTITY PER INCH | 28 STUD THREAD | | THREAD PITCH DIAMETERS | +0.2284 TO 0.2302 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|