|
|
|
National Stock Number:
5310-00-033-1794
Federal Supply Class:
5310
National Item Identification Number:
000331794
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 72066 | 70210 | HONEYWELL INTERNATIONAL INC. | | 72066 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | 72066 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.570 INCHES MINIMUM AND 1.580 INCHES MAXIMUM | | OVERALL DIAMETER | 2.550 INCHES MINIMUM AND 2.570 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4507D ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 260 OVERALL | | SPECIAL FEATURES | 9 HOLES 0.2275 IN.,1 HOLE 0.283 IN.;3 EQ SP OUTSIDE SCALLOPS | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.032 INCHES NOMINAL |
|
|