|
|
|
National Stock Number:
5310-00-037-7052
Federal Supply Class:
5310
National Item Identification Number:
000377052
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 83484P15W | 77445 | RTX CORPORATION |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.710 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.698 INCHES MINIMUM AND 0.708 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.097 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8740 OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OR AMS 2412 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | SILVER OVERALL | | TOP RECESS ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 0.710 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
|
|