5905-00-044-5822 RESISTOR,FIXED,WIRE WOUND,INDUC Index 5330-00-044-5824 SEAL,NONMETALLIC SPECIAL SHAPED SECTION

National Stock Number:
5310-00-044-5823

Federal Supply Class:
5310

National Item Identification Number:
000445823

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
2203-N10406540NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
24089-000119397BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC.
GW502BK03AN26512NORTHROP GRUMMAN SYSTEMS CORPORATION
NAS1515H02L80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
OVERALL DIAMETER0.245 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-17091,TYPE 1,COMP A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC POLYAMIDE OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM


Click here to Register for Free 30-day Trial