5910-00-045-7510 CAPACITOR,FIXED,ELECTROLYTIC Index 5910-00-045-7512 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5310-00-045-7511

Federal Supply Class:
5310

National Item Identification Number:
000457511

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
102-10296-494697MOOG INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.135 INCHES MINIMUM AND 0.139 INCHES MAXIMUM
OVERALL DIAMETER0.243 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ--S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 302 OR STEEL COMP 410 OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE FINISH32.0 MICROINCHES ALL SURFACES
THICKNESS0.0155 INCHES MINIMUM AND 0.0165 INCHES MAXIMUM


Click here to Register for Free 30-day Trial