|
|
|
National Stock Number:
5310-00-045-9685
Federal Supply Class:
5310
National Item Identification Number:
000459685
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| C4P10471-17 | 1C762 | FIELD AVIATION CO INC | | C4P10471-17 | 71867 | DE HAVILLAND AIRCRAFT OF CANADA LIMITED |
|
Techincal Specification:
| MATERIAL | IRON ALLOY 651 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5526 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.375 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | LENGTH | 0.860 INCHES MINIMUM AND | | 0.875 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.800 INCHES MINIMUM AND | | 0.815 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.093 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 1C762 | | DESIGN CONTROL REFERENCE | C4P10471-17 |
|
|