|
|
|
National Stock Number:
5310-00-052-1285
Federal Supply Class:
5310
National Item Identification Number:
000521285
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 215-72402-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.500 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ENAMEL OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.141 INCHES NOMINAL | | NUT DIAMETER | 2.438 INCHES NOMINAL | | NUT THICKNESS | 0.344 INCHES NOMINAL | | DRIVE POINT WIDTH | 0.190 INCHES MINIMUM AND | | 0.230 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 4 DRILLED | | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL BOTH ENDS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80378 | | DESIGN CONTROL REFERENCE | 215-72402-1 |
|
|