|
|
|
National Stock Number:
5310-00-057-3557
Federal Supply Class:
5310
National Item Identification Number:
000573557
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| C44608-22 | 70236 | TACTAIR FLUID CONTROLS INC | | C44608-22 | 99215 | KAISER FLUID TECHNOLOGIES INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | T-4 SOLUTION HEAT TREATED, NATURAL AGED | | HOLE DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OVERALL DIAMETER | 0.435 INCHES MINIMUM AND 0.445 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.078 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
|
|