5315-00-060-9575 PIN,GROOVED,HEADLESS Index 2915-00-060-9577 BODY,VALVE,FUEL CONTROL

National Stock Number:
5310-00-060-9576

Federal Supply Class:
5310

National Item Identification Number:
000609576

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10116529A486GNIMIKKEISTOKESKUS NCB FINLAND
310-0740-51013499ROCKWELL COLLINS, INC.
947620-313106481NORTHROP GRUMMAN SYSTEMS CORPORATION
NAS620B10L80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
OVERALL DIAMETER0.349 INCHES MINIMUM AND 0.369 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 268 OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THICKNESS0.032 INCHES NOMINAL


Click here to Register for Free 30-day Trial