5935-00-062-0903 CONNECTOR,PLUG,ELECTRICAL Index 4720-00-062-0907 TUBING,NONMETALLIC

National Stock Number:
5310-00-062-0906

Federal Supply Class:
5310

National Item Identification Number:
000620906

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
352-9561-01095105ROCKWELL COLLINS, INC.
TW-516-10-04508289THE DELBERT BLINN CO INC
TW516-1008289THE DELBERT BLINN CO INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
OVERALL DIAMETER0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM


Click here to Register for Free 30-day Trial