|
|
|
National Stock Number:
5310-00-068-5652
Federal Supply Class:
5310
National Item Identification Number:
000685652
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 488602CL7 | 77445 | RTX CORPORATION | | 488602CL7 | 93858 | HOLBROOK MERRILL CO INC | | 4886D2CL7 | 00088 | ROYAL OAK GAGE INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM | | OVERALL DIAMETER | 0.992 INCHES MINIMUM AND 0.998 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4032 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES OUTER | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE FINISH | 90.0 MICROINCHES INNER | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.052 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
|
|