|
|
|
National Stock Number:
5310-00-072-8076
Federal Supply Class:
5310
National Item Identification Number:
000728076
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-41-36A3 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.671 INCHES MINIMUM AND 0.691 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | HOLE DIAMETER | 0.631 INCHES MINIMUM AND 0.651 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 240000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TOP RECESS ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 0.671 INCHES MINIMUM AND 0.691 INCHES MAXIMUM |
|
|