|
|
|
National Stock Number:
5310-00-075-2515
Federal Supply Class:
5310
National Item Identification Number:
000752515
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| CYRD238 | 05624 | GE AVIATION SYSTEMS LLC | | CYRD238-0-6-80 | 05624 | GE AVIATION SYSTEMS LLC | | FF-W-92B | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM | | OVERALL DIAMETER | 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | CYRD 137,FSCM 05624 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TC 270,FSCM 05624 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM |
|
|