|
|
|
National Stock Number:
5310-00-081-2658
Federal Supply Class:
5310
National Item Identification Number:
000812658
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1940006 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1940006 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1940006 | 24617 | GENERAL MOTORS CORP | | 1940006 | 7X677 | GENERAL MOTORS LLC | | 1M-9971 | HD208 | PON EQUIPMENT B.V. | | 1M9971 | 11083 | CATERPILLAR INC | | 1M9971 | ZA045 | WILLIAM ADAMS PTY LTD | | 1M9971 | ZF912 | HASTINGS DEERING (AUST) PTY LTD | | 1M9971 | ZY243 | WESTRAC PTY LTD | | 33669 | 13841 | TIFFIN PARTS, L.L.C. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.835 INCHES MINIMUM AND 0.845 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.720 INCHES NOMINAL | | SURFACE TREATMENT | ZINC OVERALL AND DICHROMATE OVERALL | | THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
|
|