|
|
|
National Stock Number:
5310-00-083-7044
Federal Supply Class:
5310
National Item Identification Number:
000837044
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GN10AU16 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.045 INCHES NOMINAL | | BEARING SURFACE FINISH | 125.0 MICROINCHES | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | NOMINAL THREAD SIZE | 1.000 INCHES | | NUT HEIGHT | 0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SPECIFICATION/STANDARD DATA | 26512-GN10AU MANUFACTURERS STANDARD | | WIDTH ACROSS FLATS | 1.481 INCHES MINIMUM AND 1.502 INCHES MAXIMUM | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UNJ |
|
|