|
|
|
National Stock Number:
5310-00-086-7048
Federal Supply Class:
5310
National Item Identification Number:
000867048
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 2-160-273-01 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 120.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | HEAT TREATMENT | F-AS FABRICATED | | HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.070 INCHES MINIMUM AND 1.090 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4027 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2470 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | TOP RECESS ANGLE | 120.0 DEGREES NOMINAL | | TOP RECESS DIAMETER | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
|
|