|
|
|
National Stock Number:
5310-00-091-5011
Federal Supply Class:
5310
National Item Identification Number:
000915011
Description:
NUT,PLAIN,CAP
Detail:
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT.
|
Manufacturer Information:
| 23043 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | THREAD CLASS | 2B | | NOMINAL THREAD SIZE | 0.250 INCHES | | BEARING SURFACE FINISH | 125.0 MICROINCHES | | NUT STYLE | CAP | | MATERIAL | STEEL COMP 416F OVERALL | | DRILLED HOLE DIAMETER | 0.044 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | SURFACE TREATMENT | PASSIVATE OVERALL | | WIDTH ACROSS FLATS | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | THREAD SERIES | UNF | | HOLE TYPE AND QUANTITY | 2 DRILLED | | NUT HEIGHT | 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | COUNTERSINK ANGLE | 108.0 DEGREES MINIMUM NUT AND 112.0 DEGREES MAXIMUM NUT | | THREAD DIRECTION | RIGHT-HAND | | BEARING SURFACE TYPE | WASHER FACED | | THREAD QUANTITY PER INCH | 28 |
|
|