|
|
|
National Stock Number:
5310-00-094-1761
Federal Supply Class:
5310
National Item Identification Number:
000941761
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 1116934 | 18355 | THE BOEING COMPANY | | 1116934 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.164 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | FLANGE DIAMETER | 2.000 INCHES NOMINAL | | FLANGE THICKNESS | 0.156 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 16 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-636 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | NOMINAL THREAD SIZE | 0.562 INCHES | | NUT DIAMETER | 0.500 INCHES MINIMUM AND 0.506 INCHES MAXIMUM | | NUT LENGTH | 1.062 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | 16 HOLES AROUND FLANGE 0.156 IN. DIA | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH DIAMETERS | +0.5625 TO 0.5665 INCHES | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 12 |
|
|