|
|
|
National Stock Number:
5310-00-095-3460
Federal Supply Class:
5310
National Item Identification Number:
000953460
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 152224 | 00198 | PRATT & WHITNEY CANADA CORP |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.156 INCHES NOMINAL | | DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | COUNTERBORE DIAMETER | 3.974 INCHES MINIMUM AND 3.994 INCHES MAXIMUM NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 9310 OVERALL | | NOMINAL THREAD SIZE | 3.938 INCHES | | NUT DIAMETER | 5.162 INCHES MINIMUM AND 5.182 INCHES MAXIMUM | | NUT COUNTERBORE DEPTH | 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM NUT | | NUT STYLE | ROUND | | NUT THICKNESS | 1.094 INCHES MINIMUM AND 1.098 INCHES MAXIMUM | | SPECIAL FEATURES | 2 GROOVES ON PERIPHERY OF 4.850-4.870 IN.DIA | | SMALL END DIAMETER | 4.850 INCHES MINIMUM AND 4.870 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNS | | THREAD PITCH DIAMETERS | +3.8834 TO 3.8874 INCHES | | THREAD QUANTITY PER INCH | 12 | | UNDERCUT THICKNESS | 0.776 INCHES MINIMUM AND 0.792 INCHES MAXIMUM |
|
|